MIL-F-80056C
j.
Specify additional environmental protection requirements, if required
(see 3.2.9)
j. Painting, if different (see 3.3.5).
k.
If electromagnetic interference control is required,
specify the
equipment and subsystem class and the emission and susceptibility
required (see 3.3.7).
l.
Mounting skids (Type 11 and III), if not required (see 3.4.1).
m.
Cover (Type I), if required (see 3.4.3).
n.
Cover (Type 11 and III), if required, (specify manual or power
operated), (see 3.4.4).
o.
Pot material (Type II and III class A), if different, (see
3.4.6.2).
Pot material (Type II, class B and C), if different, (see
P"
3.4.6.3).
Water cooled transformer, if required (see 3.4.8).
q.
r.
Starting device (Type II), if required (see 3.4.9).
s. Instrument panel, if different (Type I) (see 3.4.11).
t.
Instrument panel and switch gear cubicle, if different (Type II) (see
3.4.11.1).
u.
Time proportioning type control, if different (see 3.4.12.1).
v.
Saturable core reactor or SCR controller (Type 11 class C), if
required (see 3.4.12.1).
w.
Chart width and length, if different (see 3.4.12.1.1).
Excess temperature controller, if required (3.4.12.1.3).
x.
High-Low controller in lieu of excess temperature control, if
y.
required (see 3.4.12.1.4).
z. Automatic temperature control system, if different (Type 111) (see
3.4.12.2), (specify if the same instruments and panel are required as
specified for Type I and 11 furnaces).
aa.
Electrical requirements, if different (see 3.4.13).
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business