MIL-F-80056C
Non-Government publications. The following document(s) form a part of this
2.2
document to the extent specified herein. Unless otherwise specified, the issues of
the documents which are DOD adopted are those listed in the issue of the DODISS
cited in the solicitation. Unless otherwise specified, the issues of documents not
listed in the DODISS are the isssues of the documents cited in the solicitation
(see 6.2).
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
- Temperature Measurement Thermocouples.
ANSI MC96.1
(Applications for copies should be addressed to the American National Standards
Institute, ATTN: Sales Department, 1430 Broadway, New York, NY 10018-3363.)
NATIONAL ELECTRICAL MANUFACTURERS' ASSOCIATION (NENA)
NENA
ICS
1
- Industrial Controls and Systems. (DOD adopted)
NEMA
ICS
3
- Industrial Systems. (DOD adopted)
- Enclosures for Industrial Controls and Systems.
NEMA
ICS
6
(DOD adopted)
NEMA
MG1
-Motors and Generators.
(DOD adopted)
(Application
for copies should be
addressed to the National Electrical
Manufacturers' Association, 2101 L Street, N.W., Washington, DC 20037-1680.)
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA
86
- Ovens & Furnaces. (DOD adopted)
(Application for copies should be addressed to the National Fire Protection
Association, Batterymarch Park, Quincy, MA 02269-9101.)
(Non-Government standards and other publications are normally available from the
organizations that prepare or distribute the documents. These documents also may be
available in or through libraries or other informational services.)
2.3 Order of precedence.
In the event of a conflict between the text of this
document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to
first article inspection (see 6.4), in accordance with 4.4.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business